What Is The Best Jigsaw Blade To Cut Plywood?

What is the best jigsaw for the money?

DEWALT DW331K 6.5 Amp Jigsaw.Makita JV0600K Top Handle Jigsaw.Milwaukee 2445-20 18-Volt M12 Jigsaw.PORTER-CABLE PCE345 6 Amp Orbital Jigsaw.BLACK+DECKER BDEJS600C Smart Select 5.0 Amp Jigsaw.Ryobi One+ P523 18-Volt Cordless Jigsaw.SKIL 4495-02 6.0 Amp Orbital Action Laser Jigsaw.Tacklife 6.7 Amp Jigsaw.More items…•.

How do you cut accurately with a jigsaw?

When making a cut, you need to firmly hold down the saw to keep the blade from chattering, and even then, it may vibrate a bit. The combination of downward force and vibration is tough on the work surface. Reduce marring by applying a layer or two of masking tape to the base of the jigsaw.

How thick wood can you cut with a jigsaw?

Jigsaws work best for cutting softwood that’s no more than 1-1/2 in. thick and hardwood up to 3/4 in. thick. Jigsaw blades tend to bend when cutting curves in thicker boards, leaving a beveled edge rather than a square one.

What is the best TPI for cutting wood?

A coarse tooth blade (2, 3 TPI) should be used for resawing wood and cutting thicker stock up to 8″. A fine toothed blade (18 to 32 TPI) should be used for thinner metals and plastics under 1/4″. For general cutting of 3/4″ wood 4 TPI will provide a fast cut and 14 TPI will cut slow, but leave a smoother finish.

What are the best jigsaw blades?

Best Jigsaw Blade for Hardwood: 5 of Our Favorite PicksHitachi 725397. Pros. Cons.Bosch T5002 10-Piece Assorted T-Shank Jig Saw Blade Set. Pros. Cons.Bosch T30C 30-Piece T-Shank Wood and Metal Cutting Jig Saw Blade Set. Pros. … Gunpla 15-Piece Jig Saw Blades T-Shank Blades. Pros. … BLACK+DECKER 75-626 24-pack Jigsaw Blades Set.

How do you cut thin plywood with a jigsaw?

How to Cut Plywood with a JigsawKnow Your Blade. Before you start working with plywood you should familiarize yourself with the different blade types that can be used. … Draw the Cut Line. The first thing you want to do is draw your shape or cut line. … Adjust the Speed. … Add a Fence. … Making the First Cut.

How do you keep plywood from chipping when cutting?

To prevent your cut line from tearing:Always use an appropriate blade for plywood, and be sure that it’s sharp. … Be sure the good face of your plywood is closer to the outside of the blade. … Then, add a strip of masking tape to both the top and bottom of the sheet, directly over the cut line.More items…•

What is the difference between T shank and U shank jigsaw blades?

Blade shank Most manufacturers are now using T-shank blades as standard, which makes it easier to switch blades between different machines. U-shank blades are still available but the T-shank has become more popular as most jigsaws are now fitted with a tool-less blade change to make swapping blades faster and easier.

Can I use a jigsaw to cut plywood?

The jigsaw can be used to make both straight and curved cuts in a wide variety of materials, including wood, particleboard, plywood, plastic, metal, even ceramic tile. It’s also safe and easy to use, which is why it’s often the very first power saw a new DIYer buys.

Why does my jigsaw not cut straight?

To Cut Straight your Jigsaw Needs a Guide Bearing This almost completely eliminates and side to side movement of the blade (it can still happen if you turn too sharp, or the blade gets stuck in warped or poorly supported material).

How do I choose a jigsaw blade?

When cutting wood, choose a 6–10-tpi blade. Wider gullets (the low areas between teeth) help clear sawdust. Cutting metal or plastic sheets calls for a higher tooth count and slower cut speed. A 6-tpi blade cuts faster, and tracks truer in thick material, but produces more chip-out than a 10-tpi blade.

How do you cut a plywood with a jigsaw without splintering?

Right blade for cutting plywood: Obviously, a very bad cut with a splint. You should choose the right blade for avoiding splinter. A thin blade is considered as the right blade for cutting plywood. A thin blade can give you a fine cut without splintering.

How do you prevent Tearout When cutting plywood?

Another thing you can do to prevent tearout involves our old friend blue tape. Just run a strip of blue masking tape along the cut line on the side that you anticipate tear out. The tape helps to hold the fibers in place during the cut, and usually the result is a clean crisp line.

What is the difference between an orbital jigsaw and a regular jigsaw?

A standard action jigsaw moves the jigsaw blade solely in an up-and-down motion, while in an orbital-action jigsaw the blade moves slightly forward and into the workpiece on the upswing, then slightly backward on the downstroke as the blade resets for the next cutting stroke.