Quick Answer: What Do I Do If My Wood Stain Is Too Dark?

Can dark stained wood be lightened?

When stain is applied to any species, it typically darkens the wood.

Walnut, mahogany, cherry and an assortment of exotic species are naturally colored dark, and even without stain, can only be lightened to a certain degree.

Ash, maple, oak, pine, birch, fir and cedar are light in color, and easier to lighten..

How do you refinish dark wood light?

InstructionsWear a mask and protective gloves. … Clean sawdust from wood using gauze.Lighten dark wood by wiping it with a solvent, using a nylon pad. … Applying a clear gel paint using a brush made for wood. … Brush the gel paint using mineral spirits. … Apply a layer of polyurethane sealant using a natural brush.

What happens if you stain over stain?

1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.

What do I do if my stain is too dark?

If the wood is too dark, soak a clean cloth in turpentine or mineral spirits and rub the wood firmly and evenly along the grain. This will lighten the stain but not remove it.

How do you lighten dark stained beams?

How to lighten dark stained wood beamsUse natural wood stain which is a transparent medium with the same base as the stain that you can mix with a standard stain to give it a lighter and thinner color. … Combine equal amounts of the natural wood stain and stain you want to lighten.More items…

How long does it take for wood stain to completely dry?

24-48 hoursEvery finish and stain is different, and drying times can vary widely from brand to brand or product to product. As a rule of thumb, you should wait 24-48 hours to allow the stain to fully dry before applying your polyurethane.

How can I lighten wood stain without sanding?

The most effective way to lighten the color of your stain is bleaching the wood with chemicals. Steel wool and mineral spirits can lighten your wood stain by a small amount if you don’t need to adjust the color much.

Does stain lighten or darken as it dries?

Stains lighten as they dry, then return to their damp color when a finish is applied. So the quick method of seeing the color you’ll get with the finish applied is to look at the stain while it is still damp. … It will dull the brightness of the color a little.

Does polyurethane darken stain?

Oil-based poly has an amber tone that can dramatically change the color of stained or unstained wood. Water-based polyurethane affects the color only slightly. … Oil based polyurethane will darken some woods and some stains slightly.

How do you fade wood stain?

For lightening the natural color of wood, or evening out the variation in color between heartwood and sapwood, use a two-part bleach of sodium hydroxide and hydrogen peroxide, available as a kit. Chlorine bleach works best for simply lightening an existing color stain or removing minor spills and blemishes.

Does stain get darker as it dries?

Apply a second coat of stain after the first has dried fully. This will usually produce a darker coloring, but it adds a step to the process and slows production. … Leave a dampness of stain on the wood that dries to a darker coloring.

Can I use household bleach to lighten wood?

Common laundry bleach or chlorine will effectively remove stain or dye color from wood, but will not affect the wood’s natural color. … Combined, they cause a chemical reaction that creates bleach that will blanch the stain color and can also alter the color of the wood itself.

What happens if you don’t wipe off wood stain?

Wood stain is designed to penetrate into the grain of the wood, not to remain on the surface. If you happen to spread it too thickly, or you forget to wipe off excess, the material that remains on the surface will become sticky.

Can I apply 3 coats of stain?

To deepen the color, apply a third coat. Optional, for additional luster or sheen a clear protective finish can be applied. Recommended finishes include Minwax® Fast-Drying Polyurethane or Minwax® Wipe-On Poly. 14 wood tones – click link below to see colors.

How many coats of stain can you use?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain. Watch this video to see more tips on how many coats of stain to apply.