Quick Answer: Are Moen And Delta Interchangeable?

How do I know if my Moen cartridge is bad?

Symptoms of a bad Moen 1225 and 1222B Cartridge:Leaking from the handle, tub spout or shower head when off.Difficult to open or close shower valve.Difficult to turn shower handle.Inability to get very hot or very cold water..

How do I get my free Delta Faucet parts?

Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service. Replacement parts may be obtained by calling 1 800 345 DELTA (3358) or by writing: Delta Faucet Company Product Service 55 E.

How long should a Moen cartridge last?

20 to 30 yearsThe system has expensive cartridges, they cost about $30 (2014) to replace, but they last a long time — 20 to 30 years. It’s not a bad deal, and unlike modern ceramic faucets, Moen still makes the same part to put into valve bodies made 40 years ago!

Can you replace shower handle without replacing valve?

The handle and trim for the tub/shower controls can also usually be replaced without redoing any plumbing by using a universal replacement kit (available for most brands at home centers and plumbing supply stores). … Turn off the water supply, then remove the shower handle and trim (Photo 1).

Who makes the best shower valves?

10 Best Shower Valve ReviewsDelta Faucet MultiChoice Universal Tub and Shower Valve Body.Moen 9000 Widespread Lavatory Rough-In Valve.KOHLER K-11748-KS-NA Temp Pressure Balancing Valve.MOEN 96797 Chateau Knob Handle Kit.SR SUNRISE Pressure Balance Shower Valve Faucet.Grohe 19457001 Concetto Pressure Balance Valve Trim.More items…•

Are Moen cartridges interchangeable?

Fits all Moen two-handle kitchen and lavatory faucets and two- and three-handle tub/shower faucets created prior to the launch of our Duralast® two-handle cartridges. The 1224 and Duralast cartridges are not interchangeable.

What is the difference between Delta monitor 14 and 17 series?

What is the difference between 14 Series and 17 Series Showers? The 13, 14, and 17 Series showers all use Monitor® pressure balancing valves for safety. The 17 Series has the added feature of a volume control while the 13 and 14 series offer temperature control only.

How long should a faucet cartridge last?

20 to 30 yearsThe valves are easy to move against pressure, and maintain their position easily. You can even leave them set to the same temperature setting and control the volume from off to full on. The system has expensive cartridges, they cost about $30 (2014) to replace, but they last a long time — 20 to 30 years.

How do I identify my Moen faucet model?

The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

Are Delta faucets interchangeable?

No, the faucet handles fit the same stem assembly, but are not compatible with the rest of the trim. … Delta faucets are designed to accommodate the majority of Delta handles. In most cases handle styles are available in different sizes depending on the application of the faucet.

Are shower valves universal?

These are the most commonly used and work for 99% of people. To be thorough in this guide however, we will outline the other valves and why you might use them. They are all universal and all Delta Shower Trim Kits will fit every single one of these valves.

What is TempAssure Delta?

TempAssure is a term that Delta uses to refer to their proprietary thermostatic shower cartridge technology. Rough-in Valve / Shower Valve: A required shower part that installs in the wall and hooks up to your home’s hot and cold water lines.

Where do I find my faucet model number?

The most common place to find the model number is on the label of the box you purchased the faucet in.

How do I know if I need a new shower cartridge?

How to tell if your shower cartridge is bad:Dripping or running water when you turn your shower off (most common)Difficulty turning the shower handle, which worsens over time.Shower handle gets stuck or “slips” and doesn’t turn on the water.

How much does it cost to replace a shower mixing valve?

repair a shower valve national average cost The national average materials cost to repair a shower valve is $50.80 per valve, with a range between $47.53 to $54.07. The total price for labor and materials per valve is $243.64, coming in between $221.88 to $265.40.

How do I identify my faucet cartridge?

If you cannot locate any markings on the faucet, you can start disassembling it; start with the handle. You’ll be able to measure the cartridge (stem) length of the faucet or resort to the number of splines.