Question: Does Autozone Give Money For Old Rotors?

Can you throw away old rotors?

Throw them in the trash.

Most garbage companies do not want automotive parts for recycling, despite the precious metals they may contain.

Rotors are non-toxic anyway..

How much does O’Reilly Auto Parts charge to turn rotors?

Short Answer: Many O’Reilly Auto Parts locations offer rotor turning, but this service is not available everywhere. Where available, rotor turning costs about $10 to $15 per rotor and takes about 30 minutes to one hour.

Where can I get my rotors turned?

Short Answer: There are several nationwide auto shops that will turn rotors, including Goodyear, Midas, O’Reilly Auto Parts, and Pep Boys. The cost for getting your rotors turned can range from $10 per rotor to more than $200 total, depending on where you get them done and what other brake services your car needs.

Is it cheaper to resurface or replace rotors?

While a rotor’s parallelism and thickness variation measurements might fall within manufacturer’s specifications when the brake pads are installed, remember that rotor wear accelerates as the miles add up. In most cases, it’s more cost-effective to replace this non-vented hat rotor than it is to resurface it.

How much does it cost to turn rotors at Autozone?

Rotors cost from $30 to $75 each. Higher-quality rotors like Duralast Gold, which feature a coated hat and edge and are designed to outperform your vehicle’s original equipment, usually cost a little more. Labor at a shop to replace rotors and pads is approximately $150 to $200 per axle.

Can I sand brake rotors?

If the rotors are warped and the brake pedal is pulsating as a result, then hand-sanding is simply not going to bring them back into specifications. You need someone who is properly trained to turn them on a lathe. … If, however, you’re trying to get some non-rotor material off the rotors, then yes, sandpaper will work.

How much do scrap yards pay for rotors?

Scrap them. Round here right now it’s $14 per 100lbs. Metal collectors come by the shop and offer a buck a rotor, so you KNOW they’re worth at least $1 each in scrap.

How heavy is a brake rotor?

A typical front disc rotor on a large sedan is approximately 300mm (12in) in diameter and weighs around 9.5kg (21 lbs). We’ll focus on the front disc as it generally takes 70% of the braking load.

Should I turn my rotors or replace them?

You need to turn rotors every time! … Regular brake wear and hot spots can often cause your rotors to become warped and having them turned will ensure that they last as long as possible before having to be replaced. If your rotor surface is smooth there is generally no need to have them turned.

Does O’Reilly resurface brake rotors?

Drum & Rotor Resurfacing Most O’Reilly Auto Parts locations can resurface your vehicle’s drums and rotors if they measure within specs and aren’t showing signs of extreme wear. Surface finish is crucial to proper vehicle braking and pad life and should always be part of a complete brake job.

How much do rotors cost?

Brake rotor replacement costs will cost between $200 and $400 for the parts and about $150 in labor costs. This means that you are looking at around $350 to $500 for a total brake rotor replacement job.