# Is 1 Foot Deep Enough For Fence Post?

## How much cement is needed for a fence post?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing.

Your post diameter and height determine how big each hole needs to be.

As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post..

## How deep should a 5ft fence post be?

Keep the height of your fence in mind when digging your post holes. As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.

## Will fence posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.

## How long does Postcrete take to set?

5 to 10 minutesSetting will take place in 5 to 10 minutes. 5. When set, cover top of hole with soil or grass. Do not mix POSTCRETE with water by hand or machine.

## How deep should a 8 foot fence post be?

In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level.

## How many bags of quikrete do I need for a fence post?

Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.

## How many bags of concrete do I need for a 4×4 fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

## How do you build a fence without a sinking post?

If you need a temporary fence or a border that you can move as needed, a quick way is to use concrete blocks. Attach a bracket to a concrete block that is heavy enough to hold the wood or other material you plan to use to build the fence. The posts can be mounted to the brackets and the fence finished from there.

## How do I stop my fence post from rotting?

Tamp down the gravel. You can use concrete, if desired, but the moisture in the concrete can sometimes cause wooden posts to rot more quickly, while the gravel allows water to drain quickly away from the fence post and into the soil.

## How long do pressure treated fence posts last?

How long do pressure treated fence posts last? A properly pressure treated pine fence posts, for example, can exist for a range of 20–35 years if well installed while the untreated one only lasts between 3–7 years.

## How much Postcrete do I need per post?

You’ll need to bury the posts at least 2ft In the ground. As for how many bags of postcrete you need per post, that’s purely dependant on how big you make the post holes. As a rule of thumb, when using standard post hole diggers, I average 1 bag per post. For larger holes I would allow 1.5 bags to 2 bags per hole.

## Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

## How deep should a 4 foot fence post be?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

## Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

## How far apart do you put fence posts?

Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

## Should I use 4×4 or 6×6 fence posts?

6×6 is overkill for sturdiness. 4×4 is the standard. And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial.

## Can I build an 8 foot fence?

One exception to this rule is that ornamental fences (open fences that do not visually disrupt view corridors) can typically be built higher than 6 feet. … The city will also allow an 8-foot fence to be built if it is located on or within the building set back lines (usually 5 or 10 feet from the property line).

## Can you put dry concrete in a post hole?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.