Can You Use 1/2 Inch Drywall Ceiling?

What is code for drywall on ceilings?

When applying a water-based texture material, the minimum gypsum board thickness shall be increased from 3/8 inch to 1/2 inch for 16-inch on center framing, and from 1/2 inch to 5/8 inch for 24-inch on center framing or 1/2-inch sag-resistant gypsum ceiling board shall be used.

e..

Should I install drywall vertically or horizontally?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls nine feet high or shorter, hanging the drywall horizontally has a number of benefits.

How much does a sheet of 1/2 drywall cost?

The most common drywall thickness is 1/2″ and is used in wall and ceiling applications ($10-$20 per sheet). Water-resistant drywall of the same thickness is used in bathrooms ($14-$25 per sheet). Thicker drywall, often 5/8” fire-resistant drywall, is used in garages and furnace rooms.

Can you use 3/8 drywall ceiling?

Joe, yes you can use 3/8-inch drywall on ceilings like this. … It’s the BIBLE of everything drywall and plaster. In this great book you’ll find the minimum recommendations for installing 3/8-inch drywall, including fasteners, spacing, etc.

Can you use 1/2 inch drywall ceiling?

1/2-inch: Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. 5/8-inch: These panels are commonly used for ceilings, or for walls that require a prescribed fire-resistant rating.

Is there a difference between ceiling drywall and regular drywall?

1/2″ gypsum ceiling board – ceiling board is simply drywall rated to have less sag and less pulling properties. This is normally what we use on jobs. It is not always available at big box in all lengths but we usually find it. … See this PDF to compare ceiling board to regular wall board.

How many screws do I need for ceiling drywall?

The general answer, you should use at least one drywall screw every 10-12 inches. This means that for a 4′ x 12′ sheet of drywall you will probably use around 50 screws on the entire sheet.

What is the cheapest way to cover a ceiling?

Here are some affordable ways to beautify your home’s ceilings:Paint. It’s a great way to change the perception of your space. … Tin Tiles. Hide damage and uneven surfaces with tin ceiling tiles that introduce a vintage vibe. … Moldings and More. … Tiles or Planks.

What is the cheapest ceiling to install?

DrywallDrywall. Perhaps the cheapest and most widespread ceiling solutions, drywall creates a smooth, attractive living space.

What kind of drywall do you use for a bathroom ceiling?

Conventional drywall is commonly used for ceilings in non-shower/tub areas of bathrooms, although some builders prefer to use moisture-resistant drywall — aka greenboard — instead. Moisture-resistant drywall is similar to standard drywall but has face paper that’s treated for extra resistance to mold and moisture.

How thick is gypsum for the ceiling?

Hanging 1/2-inch gypsum wallboard is standard for finishing a ceiling with joists on 16-inch centers. This means that from the center of one joist to the center of the next, it is exactly 16 inches. Thinner wallboard, such as 1/4-inch or 3/8-inch, usually isn’t sturdy enough for a wave-free ceiling.

Is lightweight drywall good for ceilings?

There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.

Is there special drywall for ceilings?

The thickest of all the types of drywall, 5/8-inch drywall is often fire-resistant drywall. It makes a great choice for ceiling applications because it helps to prevent sagging over time.

Do you sheetrock the ceiling first?

Hanging Drywall From the Top Down Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. … are of no concern, but seriously warped framing will require you to use drywall shims–long strips of 1/8- or 1/16-in.

What is the easiest ceiling to install?

Surface-mount ceiling tiles are easy to install. The grid for this system is much easier that the drop-ceiling grid, and the tiles attach directly to the grid. This is another project that can be done by one person, and in most cases, the tiles that go into place can be easily cut to size using scissors.

Can you hang drywall on 24 centers?

Always use 5/8 on 24″ centers. You can rent a drywall lift from “The Big Boxes” for about $30 a day so you won’t kill your back trying to lift & shift the rock. If you use 1/2 it will sag eventually. When it sags you will get the “Amphitheater look” between each joist.

What can I use instead of drywall on ceiling?

While more expensive, ceiling planks are an elegant choice for your new ceiling. These planks are available in a wide array of widths, colors, and wood grain patterns. Planks often give you the option of tongue-and-groove installation and may also be surface mounted on existing ceilings.

Should ceiling box be flush with drywall?

Position Box The front edge of the box must be flush with the finished wall surface, usually 1/2-inch-thick drywall. … You can use a scrap of drywall to position the box.